Original: $99.00
-70%$99.00
$29.70The Story
Highly Fluorinated water may be dangerous to your health. Drinking water with fluoride levels above 2 mg/L can lead to mottling of the teeth. Ongoing levels above 4 mg/L can result in serious health problems.
Although the main purpose of this filter is to remove fluoride, Activated Alumina can remove many other contaminants.
Reduces/Removes:
- Fluoride
- Hydrogen Chloride
- Hydrogen Sulfide
- Carbonyl Sulfide
- Carbon Dioxide
- Inorganic Arsenic
- Alcohols
- Ethers
Specifications:
- Dimensions: 10" x 4.5"
- Design Flow Rate: .25 GPM
- Weight: 4 lbs 4 oz
- Operation Temperature: 40°F to 100°F
- Filter Media: Activated Alumina
- Filter Life: 11,000 mg/L or 640 GPG
Operating Conditions:
For maximum effectiveness, do not exceed the recommended flow rate of .25 GPM. This filter lasts for 11,000 mg/l (ppm) with effluent levels below 0.2 ppm from 10 ppm feed (approximately 2750 gallons). Note: high pH and high bicarbonate levels reduce the capacity - above 100 ppm bicarbonate, reduce by 50%; above 200 ppm, reduce by 75%.
Interfering ions and the recommended flow rates must be specifically accounted for when sizing these cartridges.
Description
Highly Fluorinated water may be dangerous to your health. Drinking water with fluoride levels above 2 mg/L can lead to mottling of the teeth. Ongoing levels above 4 mg/L can result in serious health problems.
Although the main purpose of this filter is to remove fluoride, Activated Alumina can remove many other contaminants.
Reduces/Removes:
- Fluoride
- Hydrogen Chloride
- Hydrogen Sulfide
- Carbonyl Sulfide
- Carbon Dioxide
- Inorganic Arsenic
- Alcohols
- Ethers
Specifications:
- Dimensions: 10" x 4.5"
- Design Flow Rate: .25 GPM
- Weight: 4 lbs 4 oz
- Operation Temperature: 40°F to 100°F
- Filter Media: Activated Alumina
- Filter Life: 11,000 mg/L or 640 GPG
Operating Conditions:
For maximum effectiveness, do not exceed the recommended flow rate of .25 GPM. This filter lasts for 11,000 mg/l (ppm) with effluent levels below 0.2 ppm from 10 ppm feed (approximately 2750 gallons). Note: high pH and high bicarbonate levels reduce the capacity - above 100 ppm bicarbonate, reduce by 50%; above 200 ppm, reduce by 75%.
Interfering ions and the recommended flow rates must be specifically accounted for when sizing these cartridges.
